Solid Oak Porch Swings and Adirondack Chairs, Handmade in the USA
 

secure

Your Cart

Show Cart
Your Cart is currently empty.

Statistics

Visitors: 13485

Who's Online

Patio Swing Construction

Real, Solid Oak

All our lumber is local, southern red oak from right here in Northwest Alabama and Southern Tennessee. Logs are carefully selected and sawn at the mill, then air or kiln dried. Once dry, the lumber is ready to be planed, sawn, shaped, and sanded to precise standards and then assembled into the finest swing money can buy.


How Firm A Foundation

Your handcrafted, solid oak porch swing begins with a hand cut, solid oak frame. Notice the extra thick main supports that bolt to the seat struts to form a ladder style framework. The chains attach to these main supports. Many others do not use this feature. Without these main supports, the chains must attach to the seat and back, which can cause the swing to twist and eventually cause screws to loosen. Our main supports provide extra durability and make your porch swing last longer. A house is only as strong as its foundation, right?


Contoured For Comfort

The seat and back are contoured for comfort. Both the seat and back are shaped to match your seat and back for maximum comfort. Solid oak slats are custom cut for each swing to ensure a precise fit. Each slat edge is rounded for your comfort. The slats are spaced uniformly allowing air to circulate within the slats and inhibit moisture from accumulating on the wood.


 

Screwed and Glued,
But In A Good Way

All components are screwed or bolted together; not one nail or staple is used. In addition, each joint is strengthened by exterior rated glue. The holes in the slats are plugged and sanded smooth. For maximum strength and good looks, the seat and back supports are fit using half-lap joinery. 5/16" carriage bolts fasten the two pieces for a rock solid joint. All assembly hardware and finishing plugs are included with your swing.


It Ain't Finished Till I Say It's Finished

After assembly, the swing is hand sanded, then finished using Wolman™ F&P finish and preservative. This oil based finish penetrates the wood fibers sealing out damaging moisture. Wolman™ F&P contains a UV protector to resist the damaging effects of the sun, and is tinted slightly to accentuate the natural beauty of oak and resist graying.


Signed, Sealed, Delivered

The last thing that gets done before your swing is shipped is that I put my brand on the swing. "Handcrafted By Ryan Hughes"; What that means is that your swing wasn't mass produced in a huge factory, it was made one swing at a time. Your swing is then partially disassembled for shipping and delivered by the Big Brown Truck.

Visa and MasterCard accepted

Last Updated ( Thursday, 17 April 2008 )
 

 
©2007 All rights reserved · RMH WoodWorks · 1912 North Beechwood Dr. Florence, AL  35630 · (256) 335-3449 · Ryan Hughes